Stationary cut-off wheels for Non-ferrous metal
-
Type:T41
-
StructureStationary cut-off wheels for Non-ferrous metal,Thickness 2.8-3.5mm, OD: 12"-16".
-
Features:Stationary cut-off wheels for Non-ferrous metal are manufactured with a particularly high proportion of C.
-
Applicable Tools:Stationary cutting machine
-
Recommended applicationCutting of Non-ferrous metal, bronze , brass, bearing alloys, aluminium alloys.
| SIZE (mm) | INCH | Speed [m/s] | Max. Speed[RPM] | Type | M. Box |
|---|---|---|---|---|---|
| 305x2.8x20 | 12 | 80m/s | 5,100 |  |
25 |
| 305x3x25.4 | 12 | 5,100 | |
25 | |
| 355x3x20 | 14 | 4,300 | |
25 | |
| 355x3x25.4 | 14 | 4,300 | |
25 | |
| 405x3.2x25.4 | 16 | 3,800 | |
25 | |
| 405x3.2x32 | 16 | 3,800 | |
25 |
THXabrasives Stationary cut-off wheels for Non-ferrous metal are manufactured with a particularly high proportion of C. Stationary cut-off wheels are suitable for fixed position cutting machine and swing saw machine, its advantages are long service life and high cutting characteristics.
Applicable Tools:
Universal fixed cutting machine.
Advantages:
- Higher cutting speed
- Longer service life
- Easy to cut, low lateral friction
- For multifunctional cutting
- Economical
Applications:
- Cutting of Non-ferrous metals
- Cutting of bronze
- Cutting of brass
- Cutting of bearing alloys
- Cutting of aluminium alloys
Attention：Aluminum powder is very fine, easily adsorbed on the Angle grinder. In the closed space to constantly suction dust, prevent high concentration of aluminum powder explosion.
